2026 planning ranges · Canadian dollars

Vancouver Basement Waterproofing Cost Calculator & 2026 Repair Prices

Published local prices vary because a pump replacement, a crack injection, and a full drainage system solve different problems. Use these source-attributed ranges to set a budget—not as a substitute for an on-site diagnosis.

Request Local Quotes

How to read the numbers

All amounts are CAD, before tax unless a source states otherwise. They summarize publicly posted Greater Vancouver and BC planning figures reviewed July 27, 2026. Published prices are not quotes, and the widest ranges usually combine fundamentally different scopes. Ask contractors to separate diagnosis, demolition, drainage, waterproofing, electrical work, permits, and restoration.

Free Vancouver planning tool

Basement Waterproofing Cost Calculator

Choose a repair scope and enter a measurable quantity. The calculator applies the published local ranges cited on this page and shows a broad budget band—not a contractor quote.

Estimated planning range

$5,600$18,400

CAD before tax

$70–$230 per linear foot, checked against published local whole-project ranges.

Review the source methodology
This estimate intentionally stays broad. It does not price permits, engineering, hazardous-material work, mould remediation, shoring, landscaping, finished-room restoration, tax, or hidden conditions. A safe repair method cannot be selected from price alone.
Published planning ranges for common basement repair work in Greater Vancouver
Repair scope2026 planning rangeWhy the range is wide
Foundation crack injection$300–$2,500 per crackPublished Vancouver and BC ranges overlap at the low end but widen when exterior access, finish removal, movement, or a structural repair is involved.
Sump pump$500–$2,500 typical; complex new systems can exceed $4,500A pump replacement in an existing pit is not comparable to cutting a new pit, adding discharge, electrical work, an alarm, and backup power.
Interior drainage system$3,000–$18,000+Published ranges depend heavily on whether the quote covers a short problem area or a full perimeter with slab cutting, wall membrane, and a sump system.
Exterior waterproofing$10,000–$30,000+Excavation depth and equipment access usually dominate the budget. Decks, concrete, utilities, landscaping, and difficult backfill can move a project above published ranges.
Drain tile replacement$8,000–$30,000+Local published starting prices and full-replacement ranges vary with perimeter length, depth, pipe condition, access, and surface restoration.
Crawlspace encapsulation$8,000–$25,000 for many Lower Mainland homesThis broad local planning range assumes more than loose poly. Drainage, standing water, mould, insulation, dehumidification, and low-clearance access can materially change it.

Foundation crack injection

Quote variables

Crack width, movement, access, injection material, wall finish removal, and warranty.

Sump pump

Quote variables

Existing pit, pump capacity, discharge route, electrical work, alarm, and backup.

Interior drainage system

Quote variables

Linear footage, slab conditions, wall system, sump requirements, and finished access.

Exterior waterproofing

Quote variables

Excavation depth, access, restoration, membrane system, drainage, and backfill.

Drain tile replacement

Quote variables

Perimeter length, depth, camera findings, access, soil, connections, and restoration.

Crawlspace encapsulation

Quote variables

Area, clearance, drainage, remediation, insulation, humidity control, and liner thickness.

Published-source review

Where these planning ranges come from

We do not present one contractor’s advertised starting price as a market average. Instead, the table shows the overlap and spread across multiple currently published local sources. Check the source dates and request a written, property-specific scope.

Compare scope, not just totals

Questions that make quotes easier to compare

  • What evidence supports the proposed cause?
  • Which parts of the water path does this scope address?
  • What preparation and restoration are excluded?
  • What conditions could change the price after work begins?
  • What exactly is covered by the workmanship or product warranty?

Budget examples

Three scopes that should not share a price

1

Localized leak through one stable poured-concrete crack

A contractor may recommend an interior polyurethane injection after confirming that the crack is not moving and water is not entering elsewhere.

Understand this repair scope →
2

Water at the wall-floor joint around several walls

The quote may include slab cutting, an interior perimeter channel, wall drainage material, a sump pit, discharge, and finish removal.

Understand this repair scope →
3

Failed exterior membrane or perimeter drain

Excavation, utility locating, membrane, protection board, drain tile, drainage rock, backfill, and surface restoration can make this a major project.

Understand this repair scope →

No obligation

Prepare your basement repair request

Start your free request